Small Conveyor GUF-P MINI AE
변형 제품: LxB 1500x100 mm, Motor right
The GUF-P MINI AE is a belt conveyor with a modular profile design for transporting small and lightweight parts with low volumes. Thanks to its minimal installation height, this conveyor is ideal for integrating into complex systems where space is at a premium. Since the belt recirculation is integrated in the conveyor frame, the conveyor can be placed directly on the machine bed. The small diameter of the drive roller and idler roller also prevents large gaps where the products are transferred over.
The T-slots running along both sides (7 mm slot width) in the conveyor frame allow you to easily fasten the conveyors to machine frames or to attach side rails, sensors and other accessories. They also allow for the installation of a conveyor stand along the entire length of the conveyor frame to bypass projecting edges in machine beds, uneven floors and ledges.
The power supply and the controlling is done via the Igus Robot Control.
A base frame is not included in the scope of delivery. Please contact us if required!
The product can be customized to your needs. Please contact us.
신제품 하이라이트
Widths: 100 / 150
Lengths: 1000 / 1500 / 2000
Conveyor belt: PU, white FDA, restricted accumulating, antistatic
Drive: AE head drive, Igus stepper motor, 24 or 48V, DC
Motor installation position: Outlet side laterally, either on the left or right
Mode of transport: Recommended forward, continuous operation
Transmission: direct drive
Driving roll: Ø 33 mm, ungummed
Tail: Ø 33 mm
Conveyor frame: aluminum, anodized
Belt support: stainless steel
... the IgusRobot Control and the motor module item no. RL-MAT0351 the following services are possible:
Speed: 1.2 - 102m/min, adjustable
Total load at 48VDC
up to 25m/min: 20kg
> 25m/min to 45m/min: 15kg
> 45m/min to 102m/min: 7kg
Total load at 24VDC
up to 25m/min: 15kg
> 25m/min to 45m/min: 7kg
> 45m/min to 102m/min: 3kg
CE marking: meets the requirements of the Machinery Directive (MD) for a complete machine
Lengths: 400 to 3000 mm
Width: 75 mm
Total load: up to 15 kg (with width of 150 mm)
Speed: upto 15 m/min
Motor installation position: pointing downwards 90°
Belt types: from suitable to unsuitable for accumulated operation
Side rails
Stand systems
Angle fastening for table-top assembly or connection to machine frames
RBTX로 구축된 저비용 솔루션
전문가와의 무료 영상 통화 예약
